WALLBOX Pulsar Plus charging station - 7,5m Type 2 cable - 1.4 to 11kW - three-phase - Bluetooth - Wifi
WALLBOX
Securedpayment
14 Daysreturn policy
Delivery in48h
Video tutorials :
Description
A mini WALLBOX Pulsar Plus terminal, connected, and with adjustable power, designed for the home, indoors or outdoors
The WALLBOX Wallbox Plusar Plus single-phase charging station - three-phase - adjustable 1.4 to 11kW - Bluetooth - Wifi - Type2 7,5m cable is powered in three-phase. Its charging intensity can be adjusted instantly and at any time between 6A and 16A, via the Wallbox application. The charging station can therefore be configured to adapt to the power available in your home. Its attached T2 cable will ensure you secure recharging of your electric car in mode 3 .
Thanks to the Wallbox application , you can connect your charging station to your Smartphone by bluetooth or wifi. The application will allow you to manage the following parameters:
- Activate / Deactivate remote charging
- Set the charging power between 1.4 and 11kW
- Program the load at the desired time slots (to recharge only during off-peak hours for example)
- Configure the dynamic load, if the power boost is installed on the line
Attached cable 7,5m type 2
The charging station is already supplied with a charging cable attached to the charging station, type 2 and 7,5m long. This charging station is therefore compatible with all type 2 vehicles.
Wall cable tie included
The charging station is supplied with a wall cable tie that allows you to safely install the type 2 end cap after charging your vehicle.
Plug & Play activation
The charging station works in Plug & Play , as soon as you connect the cable to your vehicle and to the charging station, charging starts.
Recharge
From 7km (at 1.4kW) to 50km (at 11kW) more autonomy per hour of charging.
Mini size
The Wallbox Plusar Plus is one of the smallest charging stations on the market. Discreet, light, Design and practical. Size 16.6x16.3x8.2 cm. It is also robust (IK08) and resistant to heavy rains (IP55). It can be installed outdoors without rain protection.
Main features
- Activation: Plug & Play
- Adjustment of the charging intensity between 6 and 16A, adjustable via the app
- Bluetooth connection, Wifi: access to the Wallbox App and to the Wallbox web portal
- Three-phase power supply
- Terminal block for 10mm² rigid cable
- Leak detector direct current 6mA integrated in the terminal
- IP55 and IK08 protection: resistant to heavy rain and shocks
- Attached cable type2 length 7,5m
- Wall mounting kit included
User interface
- IOs or Android app
Accessories
Three-phase installation
Carplug test
The Carplug team has successfully tested the Wallbox Pulsar Pus terminal. The power supply connection is simple thanks to the 10mm² terminal block with its lever mechanism. No screwdriver needed to connect cables. The electrical protections selected by CARPLUG are compatible and ensure safe start-up.
The station turns on quickly, and is ready to charge in about 1 minute. We downloaded the Wallbox app, entered the serial number and Puk code, and the connection went smoothly. We then plugged in the cable: the charge started by itself at the intensity set on the application. If we change the intensity on the application, the charging intensity changes instantly on the car.
Review: Very positive. ideal terminal for a garage or a house, for a person wishing to monitor their consumption, manage their charging slots, and sometimes modify the charging intensity.
Data sheet
|
Brand's reference
|
|
| Brand | WALLBOX |
|
Compatibility
|
|
| Vehicle compatibility | Compatible with all electric cars |
| Compatibility 1 PHASE 16A | Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 1 phase 16A:BMW I3 60Ah, Citroën C-Zero, Citroën E-Mehari, Citroën Berlingo, Citoën e-Jumpy, Mitsubishi i-MiEV, Peugeot Ion, Peugeot Partner Tepee, Peugeot e-Partner,Renault Twizy, Skoda Citigo e iV, Volkswagen e-Up, Bolloré Bluesummer |
| Compatibility 1 PHASE 32A | Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 1 phase 32A: Audi R8 e-tron, BMW iX3, Citoën ë-C4, Fiat 500e, Hyundai Ioniq, Hyundai Kona, Honda-e, Jaguar I-Pace, KIA Soul , KIA Niro, KIA e-soul, Lexus UX 300e, Mazda MX-30, Mercedes e-Vito, Mercedes e-Sprinter, Nissan Leaf 2018, Nissan E-NV200, Opel Ampera , Opel Mokka-e, Peugeot e-2008, Renault Master Z.E, Renault Kangoo Z.E, Smart ForFour EQ, Skoda Citigo e iV, Volkswagen e-Golf, Volkswagen I.D 3 |
| Compatibility 3 PHASES 16A | Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 3 phases 16A: BMW I3 94Ah, BMW I3 120Ah, Citroën ë-C4, Citroën C-Zero, Citroën E-Mehari, Citroën Berlingo, DS DS3 Crossback e-Tense, Fiat 500e, Ford Mustang Mach-E, Mercedes EQA, Mercedes EQB, Mercedes EQC, Mercedes EQS, Mini Cooper SE, Opel Corsa-e, Skoda Enyaq, Polestar 2, Tesla Model 3, Tesla Model Y, Tesla Cybertruck, Volkswagen ID.3, Volkswagen ID.4, Volvo XC40 |
| Compatibility 3 PHASES 32A | Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 1 phase 32A: Audi e-tron sportback, Audi e-tron, Mercedes Classe B Elec. Drive, Mercedes Classe B Elec. Drive, Porsche Taycan, Peugeot e-2008, Peugeot e-208, Renault Zoe, Renault Zoé "Nouvelle", Renault Fluence Ze, Smart For Two Elec Drive EQ, Tesla Model S, Tesla Model X |
|
Physical specifications
|
|
| Color | Black |
| Dimensions | L166 x H163 x P82 mm |
| Weight | 4.8 kg |
| Material | Plastic |
| Charge socket | Type 2S |
| Attached cable | Attached cable 7m Type 2 |
| Shutter | Yes |
|
Electrical specifications
|
|
| Charge power | 1.4 to 11 kW - Adjustable |
| Voltage | 400V |
| Charge current | Configurable 6A, 8A, 10A, 13A or 16A |
| Mode of loading | mode 3 |
| Leakage current detection | Oui - 6mA |
| Energy meter | consumption monitoring via the App Wallbox |
| Max power | 11kW |
| Power supply | Three phase |
| poles | 3P + N |
|
Communication & Access
|
|
| Indicator | LEDs |
| Communication module | Bluetooth and Wifi - Management via App Wallbox, Wifi, Bluetooth |
| Communication protocol | ModBus RS485, OCCP |
| Access | Plug & Play |
|
Protections and Temperatures
|
|
| Protection | IP55 - withstands rain |
| Impact resistance | IK08 - High impact resistance |
| Operating temperature | -25 ° C to + 45 ° C |
|
Installation
|
|
| Mounting | Wall mounting (kit supplied) or on a stand |
| Installation | On stand, wall |
|
Certifications
|
|
| Standards and guidelines | IEC61851-1 - IEC61851-22 |
Compatible products recommendation
We can help you to choose the best charging station
- Expert advice
- Lowest Prices
- Multi-brand choice
We have the trust of our customers!
Need help? Contact our technical support.
We are available from Monday to Friday from 9:00 to 18:00